Linksys / Sipura Model 3102 VoIP bridge configuration page
software version 3.3.6(GW)
hardware version 1.1.5(a)

Setup with Axon, version 1.09

Date: March 6, 2007

Model 3102 is setup with fixed IP address (10.10.10.114) on our local network. This helps with the Axon external line setup for dialing out on the FXO line.
FXS works perfectly as an extension for our fax machine to dial out on the VoIP lines.
FXO correctly receives calls and forwards them to extension 102 as shown under PSTN  settings below.
Extension 102 is answered by the NCH IVM software and the call is routed as desired within IVM.
Trickiest part is making sure the FXO will allow outgoing calls from within Axon.
The SIP ports must be different for Line 1 (5065 in our case) and PSTN Line (5072 in our case). The Axon external line setup must point to the fixed IP address with the PSTN Line SIP port number (10.10.10.114:5072 in our case).
See Axon setup for External Line details.
We have setup the dialing plan with "8" as the starting number to initiate dialing out over the FXO Line, which was configured in the external line settings above.
Axon and IVM along with VRS and IMS are hosted on the same computer (localhost) with a fixed internal IP address. This allows us to record all VoIP calls and extensions.

See the Axon settings and external line setup page for establishing outgoing calls via 3102 by clicking here.

 
 
Router Voice  

User Login      basic   |  advanced


 
Product Information
Product Name: SPA-3102 Serial Number: FM600F606899
Software Version: 3.3.6(GW) Hardware Version: 1.1.5(a)
MAC Address: 000E08CCE652 Client Certificate: Installed
Customization: Open
 
System Status
Current Time: 1/5/2003 15:27:28 Elapsed Time: 00:57:52
RTP Packets Sent: 2280 RTP Bytes Sent: 396240
RTP Packets Recv: 1985 RTP Bytes Recv: 413680
SIP Messages Sent: 30 SIP Bytes Sent: 14372
SIP Messages Recv: 31 SIP Bytes Recv: 13059
External IP:
 
Line 1 Status
Hook State: On Registration State: Registered
Last Registration At: 1/5/2003 14:29:37 Next Registration In: 101 s
Message Waiting: No Call Back Active: No
Last Called Number: Last Caller Number: FXO1
Mapped SIP Port:
Call 1 State: Idle Call 2 State: Idle
Call 1 Tone: None Call 2 Tone: None
Call 1 Encoder: Call 2 Encoder:
Call 1 Decoder: Call 2 Decoder:
Call 1 FAX: Call 2 FAX:
Call 1 Type: Call 2 Type:
Call 1 Remote Hold: Call 2 Remote Hold:
Call 1 Callback: Call 2 Callback:
Call 1 Peer Name: Call 2 Peer Name:
Call 1 Peer Phone: Call 2 Peer Phone:
Call 1 Duration: Call 2 Duration:
Call 1 Packets Sent: Call 2 Packets Sent:
Call 1 Packets Recv: Call 2 Packets Recv:
Call 1 Bytes Sent: Call 2 Bytes Sent:
Call 1 Bytes Recv: Call 2 Bytes Recv:
Call 1 Decode Latency: Call 2 Decode Latency:
Call 1 Jitter: Call 2 Jitter:
Call 1 Round Trip Delay: Call 2 Round Trip Delay:
Call 1 Packets Lost: Call 2 Packets Lost:
Call 1 Packet Error: Call 2 Packet Error:
Call 1 Mapped RTP Port: Call 2 Mapped RTP Port:
 
PSTN Line Status
Hook State: On Line Voltage: 51 (V)
Loop Current: 0.0 (mA) Registration State: Registered
Last Registration At: 1/5/2003 14:29:37 Next Registration In: 101 s
Last Called VoIP Number: 102 Last Called PSTN Number: 7032628
Last VoIP Caller: Last PSTN Caller: INVESTOR SERVIC, 9316851125
Last PSTN Disconnect Reason: CPC Signal PSTN Activity Timer: 30000 (ms)
Mapped SIP Port: Call Type:
VoIP State: Idle PSTN State: Idle
VoIP Tone: PSTN Tone:
VoIP Peer Name: PSTN Peer Name:
VoIP Peer Number: PSTN Peer Number:
VoIP Call Encoder: VoIP Call Decoder:
VoIP Call FAX: VoIP Call Remote Hold:
VoIP Call Duration: VoIP Call Packets Sent:
VoIP Call Packets Recv: VoIP Call Bytes Sent:
VoIP Call Bytes Recv: VoIP Call Decode Latency:
VoIP Call Jitter: VoIP Call Round Trip Delay:
VoIP Call Packets Lost: VoIP Call Packet Error:
VoIP Call Mapped RTP Port:

 
System Configuration
Restricted Access Domains:
Enable Web Admin Access: Admin Passwd:
User Password:
 
Miscellaneous Settings
Syslog Server: Debug Server:
Debug Level:

 
SIP Parameters
Max Forward: Max Redirection:
Max Auth: SIP User Agent Name:
SIP Server Name: SIP Reg User Agent Name:
SIP Accept Language: DTMF Relay MIME Type:
Hook Flash MIME Type: Remove Last Reg:
Use Compact Header: Escape Display Name:
RFC 2543 Call Hold: Mark All AVT Packets:
 
SIP Timer Values (sec)
SIP T1: SIP T2:
SIP T4: SIP Timer B:
SIP Timer F: SIP Timer H:
SIP Timer D: SIP Timer J:
INVITE Expires: ReINVITE Expires:
Reg Min Expires: Reg Max Expires:
Reg Retry Intvl: Reg Retry Long Intvl:
 
Response Status Code Handling
SIT1 RSC: SIT2 RSC:
SIT3 RSC: SIT4 RSC:
Try Backup RSC: Retry Reg RSC:
 
RTP Parameters
RTP Port Min: RTP Port Max:
RTP Packet Size: Max RTP ICMP Err:
RTCP Tx Interval: No UDP Checksum:
Stats In BYE:
 
SDP Payload Types
NSE Dynamic Payload: AVT Dynamic Payload:
INFOREQ Dynamic Payload: G726r16 Dynamic Payload:
G726r24 Dynamic Payload: G726r32 Dynamic Payload:
G726r40 Dynamic Payload: G729b Dynamic Payload:
NSE Codec Name: AVT Codec Name:
G711u Codec Name: G711a Codec Name:
G726r16 Codec Name: G726r24 Codec Name:
G726r32 Codec Name: G726r40 Codec Name:
G729a Codec Name: G729b Codec Name:
G723 Codec Name:
 
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server: EXT IP:
EXT RTP Port Min: NAT Keep Alive Intvl:

 
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay: Resync Periodic:
Resync Error Retry Delay: Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
 
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
License Keys:
 
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:

 
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
VoIP PIN Tone:
PSTN PIN Tone:
Feature Invocation Tone:
 
Distinctive Ring Patterns
Ring1 Cadence: Ring2 Cadence:
Ring3 Cadence: Ring4 Cadence:
Ring5 Cadence: Ring6 Cadence:
Ring7 Cadence: Ring8 Cadence:
 
Distinctive Call Waiting Tone Patterns
CWT1 Cadence: CWT2 Cadence:
CWT3 Cadence: CWT4 Cadence:
CWT5 Cadence: CWT6 Cadence:
CWT7 Cadence: CWT8 Cadence:
 
Distinctive Ring/CWT Pattern Names
Ring1 Name: Ring2 Name:
Ring3 Name: Ring4 Name:
Ring5 Name: Ring6 Name:
Ring7 Name: Ring8 Name:
 
Ring and Call Waiting Tone Spec
Ring Waveform: Ring Frequency:
Ring Voltage: CWT Frequency:
 
Control Timer Values (sec)
Hook Flash Timer Min: Hook Flash Timer Max:
Callee On Hook Delay: Reorder Delay:
Call Back Expires: Call Back Retry Intvl:
Call Back Delay: VMWI Refresh Intvl:
Interdigit Long Timer: Interdigit Short Timer:
CPC Delay: CPC Duration:
 
Vertical Service Activation Codes
Call Return Code: Call Redial Code:
Blind Transfer Code: Call Back Act Code:
Call Back Deact Code: Call Back Busy Act Code:
Cfwd All Act Code: Cfwd All Deact Code:
Cfwd Busy Act Code: Cfwd Busy Deact Code:
Cfwd No Ans Act Code: Cfwd No Ans Deact Code:
Cfwd Last Act Code: Cfwd Last Deact Code:
Block Last Act Code: Block Last Deact Code:
Accept Last Act Code: Accept Last Deact Code:
CW Act Code: CW Deact Code:
CW Per Call Act Code: CW Per Call Deact Code:
Block CID Act Code: Block CID Deact Code:
Block CID Per Call Act Code: Block CID Per Call Deact Code:
Block ANC Act Code: Block ANC Deact Code:
DND Act Code: DND Deact Code:
CID Act Code: CID Deact Code:
CWCID Act Code: CWCID Deact Code:
Dist Ring Act Code: Dist Ring Deact Code:
Speed Dial Act Code: Secure All Call Act Code:
Secure No Call Act Code: Secure One Call Act Code:
Secure One Call Deact Code: Conference Act Code:
Attn-Xfer Act Code: Modem Line Toggle Code:
FAX Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
 
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
 
Outbound Call Codec Selection Codes
Prefer G711u Code: Force G711u Code:
Prefer G711a Code: Force G711a Code:
Prefer G723 Code: Force G723 Code:
Prefer G726r16 Code: Force G726r16 Code:
Prefer G726r24 Code: Force G726r24 Code:
Prefer G726r32 Code: Force G726r32 Code:
Prefer G726r40 Code: Force G726r40 Code:
Prefer G729a Code: Force G729a Code:
 
Miscellaneous
Set Local Date (mm/dd): Set Local Time (HH/mm):
Time Zone: FXS Port Impedance:
Daylight Saving Time Rule:
FXS Port Input Gain: FXS Port Output Gain:
DTMF Playback Level: DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method: Caller ID FSK Standard:
Feature Invocation Method: More Echo Suppression:

 
Line Enable:
 
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP ToS/DiffServ Value: SIP CoS Value: [0-7]
RTP ToS/DiffServ Value: RTP CoS Value: [0-7]
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
SIP GUID: SIP Debug Option:
RTP Log Intvl: Restrict Source IP:
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact:
Sticky 183:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
Voice Mail Server: Mailbox Subscribe Expires:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Supplementary Service Subscription
Call Waiting Serv: Block CID Serv:
Block ANC Serv: Dist Ring Serv:
Cfwd All Serv: Cfwd Busy Serv:
Cfwd No Ans Serv: Cfwd Sel Serv:
Cfwd Last Serv: Block Last Serv:
Accept Last Serv: DND Serv:
CID Serv: CWCID Serv:
Call Return Serv: Call Redial Serv:
Call Back Serv: Three Way Call Serv:
Three Way Conf Serv: Attn Transfer Serv:
Unattn Transfer Serv: MWI Serv:
VMWI Serv: Speed Dial Serv:
Secure Call Serv: Referral Serv:
Feature Dial Serv: Service Announcement Serv:
 
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
DTMF Process INFO: FAX Codec Symmetric:
DTMF Process AVT: FAX Passthru Method:
DTMF Tx Method: FAX Process NSE:
Hook Flash Tx Method: FAX Disable ECAN:
Release Unused Codec: FAX Enable T38:
FAX T38 Redundancy: FAX Tone Detect Mode:
Symmetric RTP:
 
Gateway Accounts
Gateway 1: GW1 NAT Mapping Enable:
GW1 Auth ID: GW1 Password:
Gateway 2: GW2 NAT Mapping Enable:
GW2 Auth ID: GW2 Password:
Gateway 3: GW3 NAT Mapping Enable:
GW3 Auth ID: GW3 Password:
Gateway 4: GW4 NAT Mapping Enable:
GW4 Auth ID: GW4 Password:
 
VoIP Fallback To PSTN
Auto PSTN Fallback:
 
Dial Plan
Dial Plan:
Enable IP Dialing: Emergency Number:
 
FXS Port Polarity Configuration
Idle Polarity: Caller Conn Polarity:
Callee Conn Polarity:

 
Line Enable:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg: NAT Keep Alive Dest:
 
Network Settings
SIP ToS/DiffServ Value: SIP CoS Value: [0-7]
RTP ToS/DiffServ Value: RTP CoS Value: [0-7]
Network Jitter Level: Jitter Buffer Adjustment:
 
SIP Settings
SIP Port: SIP 100REL Enable:
EXT SIP Port: Auth Resync-Reboot:
SIP Proxy-Require: SIP Remote-Party-ID:
SIP GUID: SIP Debug Option:
RTP Log Intvl: Restrict Source IP:
Referor Bye Delay: Refer Target Bye Delay:
Referee Bye Delay: Refer-To Target Contact:
Sticky 183:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires: Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl: Proxy Redundancy Method:
 
Subscriber Information
Display Name: User ID:
Password: Use Auth ID:
Auth ID:
Mini Certificate:
SRTP Private Key:
 
Audio Configuration
Preferred Codec: Silence Supp Enable:
Use Pref Codec Only: Echo Canc Enable:
G729a Enable: Echo Canc Adapt Enable:
G723 Enable: Echo Supp Enable:
G726-16 Enable: FAX CED Detect Enable:
G726-24 Enable: FAX CNG Detect Enable:
G726-32 Enable: FAX Passthru Codec:
G726-40 Enable: FAX Codec Symmetric:
DTMF Process INFO: FAX Passthru Method:
DTMF Process AVT: DTMF Tx Method:
Release Unused Codec: FAX Process NSE:
Symmetric RTP: FAX Disable ECAN:
 
Dial Plans
Dial Plan 1:
Dial Plan 2:
Dial Plan 3:
Dial Plan 4:
Dial Plan 5:
Dial Plan 6:
Dial Plan 7:
Dial Plan 8:
 
VoIP-To-PSTN Gateway Setup
VoIP-To-PSTN Gateway Enable: VoIP Caller Auth Method:
VoIP PIN Max Retry: One Stage Dialing:
Line 1 VoIP Caller DP: VoIP Caller Default DP:
Line 1 Fallback DP:
VoIP Caller ID Pattern:
VoIP Access List:
VoIP Caller 1 PIN: VoIP Caller 1 DP:
VoIP Caller 2 PIN: VoIP Caller 2 DP:
VoIP Caller 3 PIN: VoIP Caller 3 DP:
VoIP Caller 4 PIN: VoIP Caller 4 DP:
VoIP Caller 5 PIN: VoIP Caller 5 DP:
VoIP Caller 6 PIN: VoIP Caller 6 DP:
VoIP Caller 7 PIN: VoIP Caller 7 DP:
VoIP Caller 8 PIN: VoIP Caller 8 DP:
 
VoIP Users and Passwords (HTTP Authentication)
VoIP User 1 Auth ID: VoIP User 1 DP:
VoIP User 1 Password:
VoIP User 2 Auth ID: VoIP User 2 DP:
VoIP User 2 Password:
VoIP User 3 Auth ID: VoIP User 3 DP:
VoIP User 3 Password:
VoIP User 4 Auth ID: VoIP User 4 DP:
VoIP User 4 Password:
VoIP User 5 ID Auth ID: VoIP User 5 DP:
VoIP User 5 Password:
VoIP User 6 Auth ID: VoIP User 6 DP:
VoIP User 6 Password:
VoIP User 7 Auth ID: VoIP User 7 DP:
VoIP User 7 Password:
VoIP User 8 Auth ID: VoIP User 8 DP:
VoIP User 8 Password:
 
PSTN-To-VoIP Gateway Setup
PSTN-To-VoIP Gateway Enable: PSTN Caller Auth Method:
PSTN Ring Thru Line 1: PSTN PIN Max Retry:
PSTN CID For VoIP CID: PSTN CID Number Prefix:
PSTN Caller Default DP: Off Hook While Calling VoIP:
Line 1 Signal Hook Flash To PSTN: PSTN CID Name Prefix:
PSTN Caller ID Pattern:
PSTN Access List:
PSTN Caller 1 PIN: PSTN Caller 1 DP:
PSTN Caller 2 PIN: PSTN Caller 2 DP:
PSTN Caller 3 PIN: PSTN Caller 3 DP:
PSTN Caller 4 PIN: PSTN Caller 4 DP:
PSTN Caller 5 PIN: PSTN Caller 5 DP:
PSTN Caller 6 PIN: PSTN Caller 6 DP:
PSTN Caller 7 PIN: PSTN Caller 7 DP:
PSTN Caller 8 PIN: PSTN Caller 8 DP:
 
FXO Timer Values (sec)
VoIP Answer Delay: VoIP PIN Digit Timeout:
PSTN Answer Delay: PSTN PIN Digit Timeout:
PSTN-To-VoIP Call Max Dur: PSTN Ring Thru Delay:
VoIP-To-PSTN Call Max Dur: PSTN Ring Thru CWT Delay:
VoIP DLG Refresh Intvl: PSTN Ring Timeout:
PSTN Dialing Delay: PSTN Dial Digit Len:
PSTN Hook Flash Len:
 
PSTN Disconnect Detection
Detect CPC: Detect Polarity Reversal:
Detect PSTN Long Silence: Detect VoIP Long Silence:
PSTN Long Silence Duration: VoIP Long Silence Duration:
PSTN Silence Threshold: Min CPC Duration:
Detect Disconnect Tone:
Disconnect Tone:
 
International Control
FXO Port Impedance: Ring Frequency Min:
SPA To PSTN Gain: Ring Frequency Max:
PSTN To SPA Gain: Ring Validation Time:
Tip/Ring Voltage Adjust: Ring Indication Delay:
Operational Loop Current Min: Ring Timeout:
On-Hook Speed: Ring Threshold:
Current Limiting Enable: Ringer Impedance:
Line-In-Use Voltage:

 
Call Forward Settings
Cfwd All Dest: Cfwd Busy Dest:
Cfwd No Ans Dest: Cfwd No Ans Delay:
 
Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
Cfwd Last Caller: Cfwd Last Dest:
Block Last Caller: Accept Last Caller:
 
Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
Supplementary Service Settings
CW Setting: Block CID Setting:
Block ANC Setting: DND Setting:
CID Setting: CWCID Setting:
Dist Ring Setting: Secure Call Setting:
Message Waiting:
 
Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
 
Ring Settings
Default Ring: Default CWT:
Hold Reminder Ring: Call Back Ring:
Cfwd Ring Splash Len: Cblk Ring Splash Len:
VMWI Ring Splash Len: VMWI Ring Policy:
Ring On No New VM:

 
PSTN-To-VoIP Selective Call Forward Settings
Cfwd Sel1 Caller: Cfwd Sel1 Dest:
Cfwd Sel2 Caller: Cfwd Sel2 Dest:
Cfwd Sel3 Caller: Cfwd Sel3 Dest:
Cfwd Sel4 Caller: Cfwd Sel4 Dest:
Cfwd Sel5 Caller: Cfwd Sel5 Dest:
Cfwd Sel6 Caller: Cfwd Sel6 Dest:
Cfwd Sel7 Caller: Cfwd Sel7 Dest:
Cfwd Sel8 Caller: Cfwd Sel8 Dest:
 
PSTN-To-VoIP Speed Dial Settings
Speed Dial 2: Speed Dial 3:
Speed Dial 4: Speed Dial 5:
Speed Dial 6: Speed Dial 7:
Speed Dial 8: Speed Dial 9:
 
PSTN Ring Thru Line 1 Distinctive Ring Settings
Ring1 Caller: Ring2 Caller:
Ring3 Caller: Ring4 Caller:
Ring5 Caller: Ring6 Caller:
Ring7 Caller: Ring8 Caller:
 
PSTN Ring Thru Line 1 Ring Settings
Default Ring:
   
User Login      basic   |  advanced



Copyright © 1992-2006 Cisco Systems, Inc. All Rights Reserved.